Connecting the MTTL-W01 in minutes: from box to cloud

Own the MTTL-W01 Korean smart strip? Three steps, no expertise needed.

1) Setup mode: hold 10 seconds

Press and hold the main button ~10 seconds until fast blinking. A Wi-Fi network named TONLY_TAP_xxxx appears — the strip itself, ready for setup.

2) Give it home Wi-Fi from Android

Install the setup app on any Android phone, pick your 2.4 GHz home network (not 5 GHz), enter the password, pick the strip network. The app sends the settings and the strip reboots itself onto your network.

3) Add it by MAC from the browser

Open the app from any browser, register, tap "Add strip" and type the MAC printed on its label (12 characters). Online in under a minute — no label? The setup app's "Find MAC" button reads it.

Common snags

• No TONLY_TAP network? Hold a full 10 seconds to fast blinking.
• Won't join Wi-Fi? Must be 2.4 GHz, and no ":" in SSID/password.
• Shows Offline? The router needs internet — the strip must reach our cloud.

Stuck anywhere: WhatsApp support.